China machine

There are 3 handrails can be made by this machine. Size from left to right is 57mm, 50mm, 75mm raw material. Because 57mm handrail this shape bottom is concave. So, we have to add 2 roller station for process this bottom concave. Below 2 roller station is for prcess 57mm concave shape. So, when you producing 50mm or 75mm, please take out movable roller (left side).  And when producing 57mm, you show install back this roller station. How to install this roller please refer the video above show. https://www.superdamc.com/steel-tube-forming-machine/

Introduction of operation picture    Touch terminal is used for mechanical internal parameter settings and production settings (such as the number of batches, length, the number of pieces ,the number of single-aperture,and length) , showing warning and the current performance of the man-machine interface, the method of operation is as follows : Attention: operation on the button by fingers heart, not too heavy, not by a nail or other hard objects. In order to avoid damage or reducing its life; After the electrical of controlling circuit­­­ operation-----the screen shows manufacturers of the machine control system, the show is as follows: Roll Forming Machine Operate Touch Screen A few seconds later, the screen will overturn automatically or you can click "ENTER" directly to show the machine performance, as follows How to setting cutting length in roll forming machine https://www.superdamc.com/roll-former-for-sale/din-rail-roll-forming-machine.html

Handrail Roll Forming Machine Packing List https://www.superdamc.com/steel-tube-forming-machine/steel-handrail-roll-forming-machine.html

Handrails are members located at the top of the railing or railing and the side walls of the stairway for people to climb and support. Its form and selection of materials must not only meet the requirements of people's climbing and support and a comfortable feel, but also meet the requirements of being a decorative component. Commonly used hardwood, plastic, reinforced concrete, terrazzo, marble, metal profile production. There is no uniform standard for its form, and the specific method is determined by the detailed construction drawings.  Handrail roll forming machine made by Superda Stair handrails are handrails built on the stairs to ensure structural stability and safe use. Stair handrails are often supported by vertical railings, which can be attached to any side of the column at one end of the stairs, or connected to the continuous middle column of the wall. There is a stair railing style called spiral railing. If the stairs are rounded, gooseneck pipes (a vertical part that...

  Din Rail Making Machine https://www.superdamc.com/ YX8-35   Servo Motor Roll Forming machine   一、 technical parameters No. ITEM PARAMETER REMARK 1 MATERIAL Type Cold-rolled strip steel, galvanized sheet   T.(mm) 0.8-1.2mm   Yield Strength (Mpa) Q235   2 Forming speed (m/min) 4-6m   3 Forming main power (KW) 3KW FYR 4 Hydraulic power (KW) 7.5KW FYR 5 Total Power           11.5 KW FYR 6 Voltage   AC380V ， 50Hz ， 3P     二、 process Uncoiler → roll forming machine → punching hole device   → hydraulic shear device (including...

Metal tube roll forming machine start running. First, we must connect well the cable. Second, open the switch. Third, press running key, then put the round tube to roller station. It is so easy for operation tube roll forming machine. This video machine for making handrail tube with 3 sizes & shapes. Handrail tube made by Superda roll former Three types hand rail shapes were produced by one roll forming machine. Does it need to change the roller when production different handrail tubes. Handrail roll forming machine Not need, but below item is special, you can see handrail tube bottom is hollow shaped. this can't be desing in the roll station. So, Roll forming machine designer sepcial making a seperate roller station for making this convave effect tube. Custom tube shape roll station

There are only 4 button in tube roll forming machine 1,Big Red button is emergency button. 2,Left side 3 small buttons, top is running, middle is backward, last one is stop. Very easy operation tube making machine process. https://www.superdamc.com/steel-tube-forming-machine/ Handrail Tube Process Testing Sample

Roll Forming Machine with punch hole This production line is equipment for production of distribution boxes. The strip coil to be processed is manually placed on the uncoiler, and then corrected and tensioned. After leveling, it enters the hydraulic pre-punching and punching notch, and is sent to the forming machine by the guide device to form. Under the frictional damping action of the forming roller and pressure roller, after entering the bending part at a linear speed of 0-13m, the box is cut and bent as required, and then manually packed away. This production line produces 2-3 enclosures per minute. the production box quantity speed according to different product specifications. 4 hydraulic punch station for electrical box before forming process Servo feeder, Hydraulic Hole Punch: 2KW servo system, precision feeder. Hydraulic punching 5.5kw-18.5 power device (die) and cutting device. hydraulic punch hole station https://www.superdamc.com

Din Rail Making Machine https://www.superdamc.com/ YX8-35   Servo Motor Roll Forming machine 一、 technical parameters No. ITEM PARAMETER REMARK 1 MATERIAL Type Cold-rolled strip steel, galvanized sheet T.(mm) 0.8-1.2mm Yield Strength (Mpa) Q235 2 Forming speed (m/min) 4-6m 3 Forming main power (KW) 3KW FYR 4 Hydraulic power (KW) 7.5KW FYR 5 Total Power           11.5 KW FYR 6 Voltage   AC380V ， 50Hz ， 3P 二、 process Uncoiler → roll forming machine → punching hole device   → hydraulic shear device (including knife) 三、 Plate drawing as below ： Metal part Drawing ： 四， Machines List Uncoiler 1 、 Type ： Manual & not power 2 、 Parameter 1 ） Passive discharge 2 ） Coil we...