Storage shelf panel roll forming machine





Storage laminate shelf combined material rack Standard assembled materials ‌‌ rack

Regular size

1500 * 500 * 2000mm load: 100kg layers: four layers

2000 * 600 * 2000mm load: 200kg layer: four layers

2000 * 600 * 2000mm load: 300kg layer: four layers

2000 * 600 * 2000mm load: 500kg layer: four layers

Laminate shelf

1. Combined structure, without any bolts, beautiful appearance, scientific structure, easy installation and disassembly;

2. The layer height can be adjusted arbitrarily with a pitch of 50mm or 70mm,

3. Each layer can carry up to 2000kg under even distribution;

4. The surface is treated with electrostatic spray, anti-corrosion, anti-rust, durable;

5. Widely used in supermarkets, enterprise warehouses and institutions;

6. In actual application, it depends on the customer's specific design plan.

Product name, Standard Warehouse Shelf

Main frame, Contains 4 layers of steel shelves, 8 beams, 2 columns

Auxiliary frame, Contains 4 layers of steel shelves, 8 beams, 1 column

Product parameters are as follows

Specifications: length 2000 * width 600 * height 2000mm

Column specifications: 80 * 40 * 1.0MM thick C-shaped steel

Beam specifications: 60 * 40 * 1.0MM thick P-shaped steel

[Bearing]: 200-300kg / layer

Number of layers, Standard configuration 4 layers

Layer thickness 0.5MM, there are 4 reinforcing ribs under the layer

Surface treatment Electrostatic spraying after pickling and phosphating

Features Completely detachable shelf, freehand installation, the height of the upper and lower layers can be adjusted at will.

Simple structure

Beautiful appearance

without any bolts

Easy installation and disassembly

Any adjustment within 50mm section

The shelf adopts full disassembly and assembly structure, which is convenient and time-saving for assembly and disassembly, without the need of any tools

Shelf shelf can be adjusted freely according to the distance of 50mm, suitable for the storage purpose of items of different heights ☆ Layer is available in wooden and steel, and the load capacity of each layer is 100 ~ 300kg / layer.

The shelf is made of high-quality cold-rolled steel plate, the surface is treated with zinc phosphating at room temperature, and electrostatic powder spraying, high temperature curing treatment, strong corrosion resistance.

The shelves can be connected horizontally and vertically to increase the stability and safety.


Shenzhen Superda Machine Co., Ltd
Equipment for production all kinds of storage rack shelf unit.
Different types of rack shelves have different characteristics, a good shelves have the characteristics of perfect assembly, large carrying capacity and strong stability. The shelf material is made of cold roll steel. The gallery-style shelves are designed to store a large number of similar pallet goods, also called channelless shelves. Pallet shelves are commonly used in places where storage space is expensive, such as frozen warehouses. Suitable for storing large quantities, small variety of goods, batch operations. The smallest amount of space is available to provide maximum storage. It is suitable for large-volume, low-volume cargo storage operations. The forklift can directly enter the cargo lane to access the cargo, which is extremely convenient. Storage rack shelf made by roll forming machine process is high effeciency produciton rate and safetly operation.

Custom roll forming machine for rack shelf parameter



No.
ITEM
PARAMETER
REMARK
1
MATERIAL
Type
Cold-rolled strip steel, galvanized sheet

T.(mm)
1.0-1.5mm

Material strength
G300 MPA

2
Forming speed   (m/min)
3-8m
Including hole
3
Forming main power   (KW)
7.5KW
FYR
4
Hydraulic power (KW)
15KW
FYR
5
Total Power
                 22.5KW
FYR
6
Voltage
 AC380V，50Hz，3Phase
Customized

Comments

Post a Comment

Popular posts from this blog

What is Solar PV Support Bracket Systems

Image
What is Solar PV Support Bracket Systems How to making Solar bracket Solar Support Bracket Systems Introduction PV support bracket named as Solar photovoltaic bracket which is a special frame for the placement, installation and fixing of solar panels in solar photovoltaic power generation systems. The general materials are aluminum alloy, carbon steel and stainless steel. Photovoltaic power generation components have different capacities and different sizes, and the corresponding bracket weights are also different. Single solar cells cannot be used directly as a power source. As a power source, several cells must be connected in series, in parallel, and tightly sealed into components. Photovoltaic modules (also called solar panels) are a core part of solar power systems and the most important part of solar power systems. Its role is to convert solar energy into electrical energy, or send it to a battery for storage, or to drive the load. However, with the use of micro-invert...
Read more

Server Cabinet Accessories Factory China

Image
How many accessories can making a completed server cabinet enclosure. Server cabinet rack enclosure  The cabinet frame is made of nine profiles, the side panels can be removed, and the back door can be made as a single door, a double door or a sealing back panel. To making this cabinet, need metal frame post, rainforced square tube, 130 degree hinge, iron tee, mounting plate reinforcement,slider, screw, side beam etc. cabinet components Server Cabinet structure cabinet section and accessories list S-005 130 degree hinge S-005-2 Perforated hinged sleeve S-006-1 Corner plug S-007 Left and right hanging pieces (upper fixing pieces) S-007 Pendant screws S-008 Bent plate (fixing part under the mounting plate) S-008 Accessory screw and Left slider (right) S-008-1(Y) Right slider (No. 1) S-009-1 Base plate accessories S-009-2 Floor screws S-010-1 Side plate accessories S-010-2 Side plate screws 5 * 7 S-011...
Read more

What is infinitely variable control roll forming machine & Stepless adjustment forming machine

Image
What is infinitely variable control roll forming machine & Stepless adjustment forming machine The stepless adjustment roll forming machine device, it is a new technical solution field of metal forming. The utility model comprises a feeding mechanism and a rolling mechanism. The feeding upper roller shaft of the feeding mechanism is rotatably disposed between the upper support plates, the feeding lower roller shaft is rotatably disposed between the lower support plates, and the lower support plate and the base are provided with a lower support An upper adjusting member is disposed above the upper support plate, and the rolling mechanism comprises an upper panel, a lower sliding plate, a pulling rod, an upper auxiliary wheel seat, a lower auxiliary wheel base, a auxiliary wheel assembly, a screw rod, the upper auxiliary wheel base is slidably disposed on the upper guiding column, and the lower auxiliary wheel seat is slidably disposed on the lower guiding column, the upper auxilia...
Read more