Server Cabinet Accessories Factory China

How many accessories can making a completed server cabinet enclosure.

Server cabinet rack enclosure
 The cabinet frame is made of nine profiles, the side panels can be removed, and the back door can be made as a single door, a double door or a sealing back panel.
To making this cabinet, need metal frame post, rainforced square tube, 130 degree hinge, iron tee, mounting plate reinforcement,slider, screw, side beam etc.

cabinet components

Server Cabinet structure cabinet section and accessories list
S-005
130 degree hinge
S-005-2
Perforated hinged sleeve
S-006-1
Corner plug
S-007
Left and right hanging pieces (upper fixing pieces)
S-007
Pendant screws
S-008
Bent plate (fixing part under the mounting plate)
S-008
Accessory screw
and
Left slider (right)
S-008-1(Y)
Right slider (No. 1)
S-009-1
Base plate accessories
S-009-2
Floor screws
S-010-1
Side plate accessories
S-010-2
Side plate screws 5 * 7
S-011-1
Lock assembly (821) assembly
S-011-2
Single door stop (upper and lower stop)
S-011-2-1
Middle stop
S-013
Hollow nut M6 * 17
S-014-1
Back plate screws
S-014-2
Back plate screws
S-015
Door panel bracket
S-016
Iron tee
S-017
Square nut M6 / 8
S-018
Locking lever (PS)
S-018-1
Guide

Mounting plate reinforcement
S-023
File bag (orange)
S-025-1
Door stopper (door limit)
S-021
M12 rings

Bottom beam

Side beam

Side beam

Cabinet 9 fold frame profile (cold plate)

Reinforced square tube (1.0)
Nine Fold frame can be made by cold plating, galvanized steel, stainless steel
Cabinet Frame Profiles
Cabinet frame roll forming machine



Comments

  1. China ManufacturerMarch 7, 2020 at 12:31 AM

    How much the machine for frame making

    ReplyDelete
    Replies
    1. Roll forming equipmentApril 14, 2020 at 1:16 AM

      Hi, good morning, this machine price roughly USD70000

      Delete
  2. Roll Forming MachineMarch 21, 2020 at 4:38 PM

    good morning, many thanks for your list

    ReplyDelete
  3. JamelaMarch 22, 2020 at 4:47 AM

    Do you have four way connect bar which using for C channel frame cabinet?

    ReplyDelete
    Replies
    1. Roll forming equipmentApril 14, 2020 at 1:17 AM

      Hi Jamela, may I know what is for way bar, do you have photo? kindly send email to me. thank you.

      Delete
  4. GilbertMarch 27, 2020 at 6:48 PM

    How much the server cabinet frame forming machine ?

    ReplyDelete
    Replies
    1. Roll forming equipmentApril 14, 2020 at 1:18 AM

      Hi Gibert, thanks for your interesting, machine price about usd70000, I will send email to you.

      Delete

Post a Comment

Popular posts from this blog

What is Solar PV Support Bracket Systems

Image
What is Solar PV Support Bracket Systems How to making Solar bracket Solar Support Bracket Systems Introduction PV support bracket named as Solar photovoltaic bracket which is a special frame for the placement, installation and fixing of solar panels in solar photovoltaic power generation systems. The general materials are aluminum alloy, carbon steel and stainless steel. Photovoltaic power generation components have different capacities and different sizes, and the corresponding bracket weights are also different. Single solar cells cannot be used directly as a power source. As a power source, several cells must be connected in series, in parallel, and tightly sealed into components. Photovoltaic modules (also called solar panels) are a core part of solar power systems and the most important part of solar power systems. Its role is to convert solar energy into electrical energy, or send it to a battery for storage, or to drive the load. However, with the use of micro-invert
Read more

How to bending Cabinet enclosure ?

Image
How to bending distribution box , steel enclosure box? Option1, Bending desk wiht tooling. hydraulic power, manual operation. This steel enclosure box bending process problem is precision not high and production slowly. Small quatity is enclosure bending idea is okay. Option 2, Steel enclosure box bending device setting on cabinet enclosure production line. This cabinet enclosure frame bending device can process big size cabinet, and easy operation. Bending corner precision is high. Forming and Bending Box Accuracy a. Shear length tolerance: ≤ ± 0.5mm / m b. Width tolerance: ≤ ± 0.5mm c. Sickle curve: ≤2mm / m d. Burr: ≤0.1mm (new blade cutting ordinary carbon steel plate with reasonable clearance) For example, Power distribution box production line can do cabinet dimensions height adjustable 300-1200mm, depth adjustable 160-400mm.and length not limited.
Read more